Packaging Styles

Folding carton with a pre-glued crash-lock base that locks itself when the flat tube is squared, and a straight tuck top with dust flaps. Fast to set up by hand and strong enough for heavier retail contents.

2D dieline + 3D fold preview available

Snap Lock Bottom Carton

FOLDING CARTON · ECMA · A20.30

Folding carton whose base is closed by three interlocking panels folded in sequence — the classic 1-2-3 bottom. No bottom gluing is required, which lowers converting cost versus an auto bottom.

2D dieline + 3D fold preview available

Seal End Carton

FOLDING CARTON · ECMA · A10.10

Folding carton with glue-sealed top and bottom ends instead of tuck flaps. Runs on automatic cartoning lines and gives a tamper-evident closure, which is why it dominates cereal, medicine and dry-goods packaging.

2D dieline + 3D fold preview available

Display Carton

FOLDING CARTON

Counter-top display carton with a perforated tear-away front panel. It ships as a closed carton and converts into an open-fronted display tray at the point of sale without any additional fixture.

2D dieline + 3D fold preview available

Hanger Carton

FOLDING CARTON

Tuck carton with an integral header panel die-cut with a euro slot, so the pack can hang from a peg rail as well as stand on a shelf. Common for pharmacy, hardware and accessory ranges.

2D dieline + 3D fold preview available

Insert Carton

FOLDING CARTON

Folded paperboard fitment that drops inside an outer carton and holds product in die-cut cavities. It stops movement in transit and presents the contents in a fixed position when the pack is opened.

2D dieline + 3D fold preview available

Tray Carton

FOLDING CARTON · ECMA · B20.20

Open-topped tray formed from a single blank, with corner gussets glued behind the side walls. Used on its own for shelf-ready product and as the base half of tray-and-sleeve or two-piece sets.

2D dieline + 3D fold preview available

Tray and Sleeve

FOLDING CARTON · ECMA · B20.20+A50.10

Two-part set combining a glued corner tray with an open-ended sleeve that slides over it. The sleeve carries the branding while the tray holds the product, giving a drawer-style reveal at a folding-carton price.

2D dieline + 3D fold preview available

Bottle Carrier

CARRIER

Basket-style carrier with a central spine handle and integral dividers that keep bottles apart in transit. Formed from one blank, it carries and merchandises a multi-pack without secondary packaging.

2D dieline + 3D fold preview available

Pillow Box

SPECIALTY RETAIL

Curved-end carton that closes into a pillow profile. The arced end creases mean no separate flaps are needed, giving a distinctive retail shape from a very economical single blank.

2D dieline + 3D fold preview available

Hexagonal Box

SPECIALTY RETAIL

Six-panel glued tube that closes with interlocking petal flaps at each end. The hexagonal footprint stands out on shelf and suits candles, cosmetics and premium confectionery.

2D dieline + 3D fold preview available

Pyramid Box

SPECIALTY RETAIL

Four tapered faces rising from a square base to a tucked apex. A novelty gifting structure that assembles without glue once the seam is bonded, popular for favours and promotional gifts.

2D dieline + 3D fold preview available

Book Style Box

RIGID PREMIUM

Hinged box built around a spine so the lid opens like a hard-backed book, revealing a fitted inner tray. The wrap-over front edge holds the lid shut and gives a premium unboxing without a separate lid to misplace.

2D dieline + 3D fold preview available

Regular Slotted Carton (RSC)

CORRUGATED · FEFCO · 0201

The default corrugated shipper. All four flaps are half the box width so the outer pair meets at the centre line, top and bottom. It is the most material-efficient corrugated style because the blank has no internal waste.

2D dieline + 3D fold preview available

Half Slotted Carton (HSC)

CORRUGATED · FEFCO · 0203

A regular slotted container with the top flaps omitted, leaving a permanently open top. The base still closes with meeting half-width flaps, so the carton behaves as a rigid deep tray that can be top loaded, over-packed or capped with a second inverted HSC. It is the standard choice for automated top-fill lines and for parts that must stay visible and reachable on a shelf or bench.

2D dieline + 3D fold preview available

Full Overlap Carton (FOL)

CORRUGATED · FEFCO · 0204

A slotted shipper whose flaps are as long as the box is wide, so the outer flaps overlap completely rather than meeting at the centre. The doubled top and bottom decks resist puncture and carry far more stacking load than a regular slotted container in the same board grade. It is the usual answer when a heavy or edge-sensitive product would crush an RSC.

2D dieline + 3D fold preview available

Five Panel Folder

CORRUGATED · FEFCO · 0410

A long flat blank of five creased panels that wraps around the cross-section of a narrow product and closes with a fifth panel folded back over the first wall. Layered end flaps build each end up to three plies, which is what makes the style stiff enough for items far longer than they are wide. It ships completely flat and needs no glue, so it suits low volumes and awkward lengths that no stock box fits.

2D dieline + 3D fold preview available

One Piece Folder (Book Wrap)

CORRUGATED · FEFCO · 0420

A single die-cut blank that wraps around flat contents and closes with a front flap, forming a mailer with no separate lid and no manufacturer seam. The walls set the internal depth exactly, so books, prints and media travel without void fill and without shifting. It folds from flat to sealed in one motion, which makes it the standard pick-and-pack mailer for print and media fulfilment.

2D dieline + 3D fold preview available

Roll End Front Tuck (RETT)

CORRUGATED

A glue-free corrugated tray whose side walls are rolled back on themselves to finish at double thickness, with a hinged lid that closes over the front and tucks into a slot in the base. The rolled walls give the box its rigidity and its clean cut edges, so the interior presents well enough for retail unboxing. It assembles by hand in seconds and needs no tape, which suits both fulfilment lines and returns.

2D dieline + 3D fold preview available

Self-Locking Mailer

CORRUGATED · FEFCO · 0427

Corrugated mailer with a crash-lock base that interlocks when the flat tube is squared, and a tuck lid with side lock tabs. No tape is required to erect or close the pack.

2D dieline + 3D fold preview available

Die-Cut Tray

CORRUGATED · FEFCO · 0422

Open-top tray with die-cut interlocking corners. The walls raise and lock without glue, giving a quick-erect retail or food tray from a single blank.

2D dieline + 3D fold preview available

Shelf-Ready Tray (SRP)

DISPLAY · FEFCO · 0713

Shipper that converts to a retail display tray. A perforated lid is torn away at the shelf, leaving the product sitting in the base tray. One pack serves distribution and merchandising.

2D dieline + 3D fold preview available

Pizza Box

FOOD SERVICE

One-piece corrugated box with a shallow base, four self-locking walls and a hinged lid that tucks down the front. The lid tuck flap carries two lock tabs that engage slots in the front wall, so the box can be closed, opened and reclosed without glue or tape. Corner tabs behind the front and rear walls give the walls enough rigidity to be stacked while hot.

2D dieline + 3D fold preview available

Burger Clamshell

FOOD SERVICE

Hinged two-tray pack formed from a single blank: a base tray holds the product and a matching lid tray folds over it on a rear hinge. A tab on the lid front wall locks into a slot in the base front wall, giving a secure but reopenable closure. Locking corner tabs keep both trays square without glue, so the pack is assembled at the counter.

2D dieline + 3D fold preview available

Snack Carton

FOOD SERVICE

Tapered open-top carton that is wider at the mouth than at the base, so filled units nest in a dispenser and empty blanks nest in storage. A single glued side seam and a folded base make it a one-piece structure, and the lowered front wall gives the scoop profile used for fries and hot snacks. The narrow base keeps the footprint small on a service counter.

2D dieline + 3D fold preview available

Noodle Takeout Box

FOOD SERVICE

Folded pail with tapered walls, an interlocking folded base and top flaps that lock together with a tab and slot. The base is formed by folding rather than gluing, so the only adhesive in the structure is the side seam applied at the converter. The taper lets filled pails nest on a counter and lets flat blanks stack in minimal space.

2D dieline + 3D fold preview available

Cup Carrier

FOOD SERVICE

Flat blank die-cut with cup holes and folded support walls that hold the platform above the surface. Cups are gripped at the rim by the holes, so drinks stay upright while being carried and the carrier assembles without adhesive. The hole layout is driven by the cup count, giving a two-cup or four-cup carrier from the same construction.

2D dieline + 3D fold preview available

Telescope Box

RIGID PREMIUM

Two-piece rigid set in which a deep lid telescopes down over the outside of the base rather than seating on a rim. The overlap between the two parts stiffens the walls and lets one lid depth accommodate a range of fill heights. Both parts share the same wrapped tray construction, so the set is produced from two nested blanks.

2D dieline + 3D fold preview available

Shoulder / Neck Box

RIGID PREMIUM

Rigid two-piece presentation box with a raised inner neck so the lid sits flush on a shoulder. The collar hides the join and gives a premium, flush close used for cosmetics, jewellery and devices.

2D dieline + 3D fold preview available

Slipcase

RIGID PREMIUM

Open-ended rigid case that a book, boxed set or inner carton slides into. Five panels wrap a spine, two faces and the top and bottom; one end stays open.

2D dieline + 3D fold preview available

Belly Band

SLEEVE

Narrow paper wrap that holds a carton, book or multi-pack together without a full sleeve. Four faces plus a glue tab wrap the product; height is the band width.

2D dieline + 3D fold preview available

Packaging Styles

Tuck Boxes

Mailer Boxes

Display Boxes

Pillow Boxes

Gable Boxes

Drawer Boxes

Straight Tuck End

Book Style Boxes

Right Bottom Dust

Mailer Box

Two Piece Boxes

Sleeve Box

Two Piece Box

Drawer Box

Magnetic Closure Box

Cake Box

Gable Gift Box

Envelope Box

Gable Box

Window Box

Window Cake Box

Roll End Mailer

Hinged Lid Box

Auto Bottom Carton

Snap Lock Bottom Carton

Seal End Carton

Display Carton

Hanger Carton

Insert Carton

Tray Carton

Tray and Sleeve

Bottle Carrier

Pillow Box

Hexagonal Box

Pyramid Box

Book Style Box

Regular Slotted Carton (RSC)

Half Slotted Carton (HSC)

Full Overlap Carton (FOL)

Five Panel Folder

One Piece Folder (Book Wrap)

Roll End Front Tuck (RETT)

Self-Locking Mailer

Die-Cut Tray

Shelf-Ready Tray (SRP)

Pizza Box

Burger Clamshell

Snack Carton

Noodle Takeout Box

Cup Carrier

Telescope Box

Shoulder / Neck Box

Slipcase

Belly Band